Benrhos Ltd - Industrial Temperature Specialists
Tel +44 (0) 7974 819736
  • Home
  • Temperature Products
    • ULTAS Temperature Sensors Range
    • Icero+
    • Custom PRT 100ohm probes
    • ADAPT
    • ITS 90 Software
  • Engineering Design
  • Contact Us

Latest Bath Calibration bath Insert

4/3/2019

0 Comments

 
The images below are of our latest machined copper block for a customer’s stirred water calibration bath.  It is 250 mm long by 80 mm in diameter.  The probe holes are 10 mm in diameter and drilled to an impressive depth of 200 mm.  Drain holes 3 mm in diameter are through drilled into the probe holes to make life easier when the block is removed from the bath and needs draining.  See below for an image of the top of the block and one of the base.

Picture
Picture
0 Comments



Leave a Reply.

    Archives

    May 2019
    April 2019
    March 2019
    February 2019
    November 2018
    August 2018
    March 2014

    Categories

    All

    RSS Feed

Our Services

Products
Laboratory Assessor's Management Services
Design

Company

Contact Us
Copyright 2014 Benrhos Ltd: Tyn Y Benrhos, Llanfachreth, Dolgellau, LL40 2NW: info@benrhos.co.uk
Photo used under Creative Commons from clasesdeperiodismo