Temperature Products
Benrhos offers a range of temperature products for customers who require high quality and excellent value for money. 100% of the ULTAS PT100, thermocouples & thermistor probes we produce are thermally cycled and issued with a unique certificate of conformity. We also offer a design service to our customers who need help creating a temperature measuring product for a specific application. We can work from written descriptions and will make on site visits to ensure that we offer you the correct solution.
Temperature Sensors
|
NEW! ULTAS REFERENCE PRT Range
|
ULTAS 250 AND 450
Reference platinum resistance thermometer. High accuracy, suitable for calibrating other thermometers against it by comparison. Available in a variety of lengths. Range -100 °C to 250°C & 450°C. Accuracy ± 0.005 °C or better is possible. Stability ± 0.010 °C or better at 0°C per annum but dependent upon use.
| ||||||
|
ULTAS 100Ω PRT
|
ULTAS 200
A Teflon® hermetically encapsulated 4 wire reference platinum resistance thermometer for accurate temperature measurements in harsh environments such as environmental chambers, autoclaves, liquid nitrogen and aggressive liquids. Range -200 °C to +200°C. Accuracy ± 0.010 °C or better is possible. Stability ± 0.010 °C or better at 0°C per annum but dependent upon use. Similar thermometers: Fluke 5606 & 5607 
| ||
Icero+ Stirred Liquid Calibration Bath
Our 0°C bench top ice/water calibration baths are very popular and an essential item for any laboratory. These baths are particularly suited to onsite calibration checks as they are battery powered and portable.
ADAPT - Switch box
|
Icero+
Zero Ice point bath has the following main features:
The ADAPT is a novel way of connecting sensors and sources to measuring equipment such as platinum resistance thermometers (PRTs) to a temperature indicator. Use 1: The ADAPT can be used as a break-out box to connect 1 or 2 resistance thermometers to a single channel of a temperature indicator or a logger. Use 2: As Use 1 above but connecting resistors into a meter. Use 3: Connecting 1 or 2 voltage signals to a voltmeter. Use 4: The ADAPT can be used to do simulation calibrations of resistance thermometer based temperature indicators. Use 5: One set of terminals can be shorted together to be used for ‘zeroing’ a meter whilst the other set of terminals are used as the signal input. Use 6: Calibration of 3-wire PRTs using a 4-wire resistance meter can be performed.
| ||||
