Benrhos Ltd - Industrial Temperature Specialists
Tel +44 (0) 1341 440649
  • Home
  • Courses & Training
    • Temperature Measurement and Calibration
    • Calculating measurement uncertainty for plant and laboratories.
    • Humidity training
    • Setting up and working with the ISO-17025 Standard
    • Onsite Training
    • Lecturing
  • News
  • Temperature Products
    • Digital Sensors & Loggers
    • ULTAS Temperature Sensors Range
    • Icero+
    • Custom PRT 100ohm probes
    • Custom Thermistor probes
    • Custom Thermocouples
    • ADAPT
    • ITS 90 Software
  • Lab Accreditation
  • Engineering Design
  • Contact Us
  • News
  • Setting up and working with the ISO-17025 Standard

Inserts for Liquid and Dry Calibration Baths.

20/2/2019

0 Comments

 
Benrhos can help design and produce accessories for calibration laboratories such as the aluminium insert for a Fluke liquid calibration bath shown below.  Most materials can be machined including deep hole drilling of metals such as nickel alloys and Fecralloy.  Inserts for Isotech, Ametek and Fluke baths can be supplied to the customer's requirements at a competitive price.
Picture
The bath insert example above has:
  1. Angled holes for probes with large heads and also enable the probes’ sensors to be closer together which will reduce the radial uncertainty contribution.
  2. The threaded bar has equally spaced horizontal holes through it and pins that enable the immersion depth to be changed quickly and simply even if the insert is loaded with probes.
  3. The base of the insert has small diameter holes through drilled into the probe holes so that the probe holes can be drained of liquid without having to invert the insert when it is removed.
0 Comments



Leave a Reply.

    Archives

    April 2019
    March 2019
    February 2019
    November 2018
    August 2018
    March 2014

    Categories

    All

    RSS Feed

Powered by Create your own unique website with customizable templates.
Photo used under Creative Commons from clasesdeperiodismo